收藏本站
the system displays an error message and ceases the programming.
The second mode does not perform verification during programming.
The process continues even if an error occurs. Upon completion, the
system displays a successful programming message. However, the
message only indicates successful completion of programming. You
must perform the verify function to ensure accuracy.
? Read reads the content of the chip into the buffer. Open the Buffer Edit dialog
?
box to view the content. ?
Notes: The system cannot read the content of encrypted chips. ?
The system cannot read PLD devices since the test vector is not in
the chip.
If a chip includes ConfigWord, the system reads the ConfigWord data
and saves it to the ConfigWord buffer.
? Verify compares the content of the buffer with that of the chip.
Notes: If there is any discrepancy, verification ceases and the system displays
a failure message. For most memory chips and SCM chips, the failure
message includes address and data. For PLD devices, the message
displayed depends on the programming reference. Only the chips
that pass verification can be recognized as the chips being
programmed correctly.
Some chips do not provide the cell to cell check function. Instead, these
chips provide only the accumulation check function similar to the
VerifyCRC.
A few chips do not provide the accumulation check function. The system
performs the check automatically in the programming process.
? Blank_check checks if the device is in blank state, which is dependent on the
data manual. If filling the blank data buffer is selected when the devices are
selected, the programmer will fill all the HEX/ASCII buffer data with FF or 00
(Hex), and the fuse buffer with 1 or 0 after the device is selected. An encrypted
chip may be displayed as a blank chip. ?
Superpro ? 5000 User’s Guide
60
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
CYCLONEMAX CYCLONE MAX FLASH PROGRAM
D-1723-WH DRAWER SLIDING 16.56X6.31X19.18"
D072-0103 DEV KIT 7 NIMBLE SBC/FUSION7/BB
D10B2 SURGE SUPPR NETWORK BNC
D1U-12-CONC 12V D1U OUTPUT CONNECTOR CARD
D1U-48-CONC 48V D1U OUTPUT CONNECTOR CARD
D1U-52-CONC 52V D1U OUTPUT CONNECTOR CARD
D1U3CS-D-850-12-HC4C DC/DC FRNT END 850W 12V 3.3V AUX
相关代理商/技术参数
CX100A6 制造商:DANAHER SPECIALTY PRODUCTS 功能描述:TIMER, EAGLE SIGNAL, ELECTRONIC REPEAT CYCLE, LCD, 120V, CYCL-FLEX PANEL MT 制造商:Veeder-Root Company 功能描述:ELECTRONIC CYCLE TIMER 制造商:VEEDER ROOT 功能描述:ELECTRONIC CYCLE TIMER; Supply Voltage Range:120V AC; Time Min:0.01s; Time Max:199.9h; Reset Time:30ms; No. of Digits / Alpha:4-1/2; Supply Current:10A; Supply Voltage AC Max:120V; Time Range:0.01sec to 199hr 59min
CX100B6 制造商:Veeder-Root Company 功能描述:
CX100DB BLACK 100M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 100M
CX100DB BLACK 250M 制造商:IMAGE 功能描述:CABLE COAX CX100DB BLACK 250M
CX-100H 制造商:Taiyo Electric Ind. 功能描述:
CX-100NUT 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-2C 制造商:Taiyo Electric Ind. 功能描述:
CX-100RT-3C 制造商:Taiyo Electric Ind. 功能描述: